UBIWHOLE-HOUSEUBI / MATERIALS
Choose a category, then compare its selections.
Library total: 187 · Shown on this page: 169–187
Wall-panel, partition and backing systems
Material system
Evidence-gated project direction for 18 mm melamine/PET-faced wall panel with side light-strip groove; actual construction, dimensions, finish, installation and performance require current samples, drawings and supplier confirmation.
4 material illustrations
Wall-panel, partition and backing systems
Material system
Evidence-gated project direction for 18 mm melamine-faced wall panel with single/double edge-inlaid metal lines; actual construction, dimensions, finish, installation and performance require current samples, drawings and supplier confirmation.
4 material illustrations
Wall-panel, partition and backing systems
Material system
Evidence-gated project direction for 18 mm engineered-board wall-panel backing spacer box; actual construction, dimensions, finish, installation and performance require current samples, drawings and supplier confirmation.
4 material illustrations
Engineered-board cabinet-door material systems
Material system
Evidence-gated asymmetric cabinet-door direction with a PET decorative front, a generic engineered-board core and a decorative-paper reverse. The illustration does not select the only valid core or prove an exact product.
4 material illustrations
Plywood cabinet assemblies
Material system
A cabinet-panel direction combining a reviewed seven-ply plywood core, generic laminate on both broad faces and PVC edging on all four sides.
4 material illustrations
Plywood cabinet assemblies
Material system
A cabinet-shelf direction combining a plywood core, a visible HPL face and one PVC-finished front edge.
4 material illustrations
Coatings & finishes
Finish
An open-pore wood-finish direction that preserves visible wood pores and grain.
4 material illustrations
Engineered panel component systems
Material system
An 18 mm electrostatic powder-coated MDF shelf with two rounded front corners and two square rear corners. Images are concept illustrations; confirm colour, installation and load against project samples and drawings.
4 material illustrations
Composite cabinet-door systems
Material system
A framed cabinet door with an open PVC rattan-weave inset. The door-core pairing uses 18 mm melamine board plus PVC weave, while the complete framed door is 25 mm thick; these are separate levels.
4 material illustrations
Engineered panel component systems
Material system
A 22 mm lacquered MDF decorative panel with a continuous R18 radius on one or both height edges. Final colour and joining detail are confirmed for each project.
4 material illustrations
Wood
Material variant
An alder wood direction for cabinet doors and interior furniture; confirm the species and finish with the project sample.
4 material illustrations
Wood veneer
Material variant
Maple veneer is a thin wood facing for cabinet doors, furniture and interior panels. This group explores warm light wood tones and fine-grain pairings.
4 material illustrations
Wood
Material variant
A light warm wood and fine-grain appearance direction for discussing solid-wood cabinets and loose furniture.
4 material illustrations
Decorative components
Component or accessory
Straight horizontal or vertical decorative rails project from a flat cabinet front to organize its visible lines.
6 material illustrations
Panels
Material variant
A particleboard core documented as being made from radiata-pine flakes; confirm the selected facing, edge system, dimensions, grade and supporting documents.
4 material illustrations
Material & component systems
Material system
A calcium-silicate board combined with a selected decorative facing for coordinated interior-panel design.
Kitchen plinth profiles
Material system
A cabinet-base profile direction covering straight runs, butt joints and external corners for kitchen detailing.
4 material illustrations
Kitchen plinth profiles
Material system
Aluminium components for kitchen cabinet bases, shown as a straight sample, a butt joint, separate lighting coordination and an external corner.
4 material illustrations
Panels
Material
A technical subclass of thin high-density fibreboard for discussing cabinet backs, drawer bottoms and faced-panel appearance.
4 material illustrations
No matching entries. Change the category or entry type, or clear the filters.
START WITH YOUR PROJECT
Bring a rendering, CAD drawing, BOQ, sample or reference image. We can start from the information you have.
Start a project